|
|
Handheld Spectrum Analyzer with continuous frequency coverage from 9 kHz to 20.0 GHz..
Handheld Spectrum Analyzer with continuous frequency coverage from 9 kHz to 20.0 GHz..
|
|
|
50 GHz bandwidth on 2 channels,
- 50GHz bandwidth on 2channels
- 160 GSa/s sample rate on 2 channels / 80 GSa/s sample rate on 4 channels
- Up to 2 Gpts memory, with 50 Mpts per channel standard
- Upgradeable to 63 GHz bandwidth on 2 channels
|
|
|
12.5 Gb/s BERT System
The Agilent N4903B High-Performance Serial BERT (J-BERT) provides complete jitter tolerance test solution for characterization of serial gigabit devices. The N4903B offers complete, integrated and calibrated jitter composition for stressed eye testing of receivers up to 14.2 Gb/s. Automated and compliant jitter tolerance testing allows quick and accurate characterization for all popular serial bus standards, such as PCI Express, SATA, FB-DIMM, Fibre Channel, CEI, Gigabit Ethernet and XFP. The N4903B matches to latest serial bus interfaces perfectly with its ability to analyze undeterministic traffic, generate complex pattern sequences, subrate clock outputs. Clockless and differential interfaces can be tested.
|
|
|
4 ports, 26.5GHz dual source, base hardware configuration
Key Features
- 10 MHz to 26.5 GHz
- 4-ports with two built-in sources
- 127 dB system and 132 dB receiver dynamic range, 32,001 points, 32 channels, 15 MHz IF bandwidth
- High output power ( 13 dBm) and a wide power sweep range (38 dB)
- Best dynamic accuracy: 0.1 dB compression with 12 dBm input power at the test port
- Low noise floor of -114 dBm at 10 Hz IF bandwidth
|
|
|
10 Hz to 44 GHz, EXA Signal Analyzer
Key Features & Specifications
- 10 Hz to 44 GHz
- 3.6, 7 or 44 GHz internal preamplifier (optional)
|
|
|
4 Ch 13 GHz Serial Data Analyzer
SDA 8 Zi Series
SDA 8 Zi Serial Data Analyzers are based on the WaveMaster 8 Zi Series oscilloscope and are equipped with double the standard memory to capture more unit intervals in the eye diagram. They include an enhanced high-speed serial pattern trigger that operates on up to 80 bit patterns and at speeds up to 3.125 Gb/s. Whether debugging eye pattern or other compliance test failures, the SDA 8 Zi Series rapidly isolates the source of the problem in your design.
- Display Eye Pattern, TIE, Bathtub Curve and Jitter Histogram on the screen at the same time
- Create Eye Patterns utilizing the full memory for maximum statistical significance
- 100 times faster Eye Diagram creation
- Gain insight with IsoBER and Mask Violation Locator tools
|
|
|
9kHz to 30GHz Spectrum Analyzer
Key Facts:
* Frequency range 9kHz to 30GHz
* 40 MHz analysis bandwidth
* 0.4 dB level measurement uncertainty up to 7 GHz
* Measurement applications for GSM/EDGE (including EDGE Evo), WCDMA/HSPA+, LTE, WiMAX, WLAN, vector signal analysis, analog modulations
* Easy on-site upgrading with options
* -110 dBc (1 Hz) phase noise at 10 kHz frequency offset
* +15 dBm third order intercept (TOI)
* Displayed average noise level (DANL) in 1 Hz bandwidth: -155 dBm at 1 GHz, -147 dBm at 30 GHz with preamplifier R&S?FSV-B24: -162 dBm at 30 GHz
* Removable hard drive for applications where security is a concern
* Frequency range up to 110 GHz with R&S FSV-B21 option integrated in the R&S FSV30/40 and the R&S FS-Z60/-Z75/-Z90/-Z110 harmonics mixers
LXI Class C conformant
|
|
|
26.0 Gb/s BERTScope
The BERTScope BSA Series Bit Error Rate Testers provide a new approach to signal integrity measurements of serial data systems. Perform bit error ratio detection more quickly, accurately, and thoroughly by bridging eye diagram analysis with BER pattern generation. The BERTScope BSA Series enables you to easily isolate problematic bit and pattern sequences, then analyze further with seven types of advanced error analysis that deliver unprecedented statistical measurement depth.
|
|
|
4 Analog Channels 1 GHz Bandwidth Models, 16 Digital Channels, 1 ch RF
- 4 Analog Channels
- 500 MHz or 1 GHz Bandwidth Models
- 16 Digital Channels
- MagniVu High-speed Acquisition provides 60.6 ps Fine Timing Resolution
- 1 RF Channel
- 50 kHz - 3 GHz or 50 kHz - 6 GHz
- Standard Passive Voltage Probes 3.9 pF Capacitive Loading and 500 MHz or 1 GHz Frequency Range Models
- Ultra-wide Capture Bandwidth =1 GHz Analog Bandwidth
Mixed Domain Analysis
- Time-correlated Analog, Digital, and RF Signal Acquisitions in a Single Instrument
- Wave Inspector? Controls provide Easy Navigation of Time-correlated Data from both the Time and Frequency Domains
- Amplitude, Frequency, and Phase vs. Time Waveforms derived from RF Input
- Selectable Spectrum Time to Discover and Analyze how RF Spectrum Changes over Time ? Even on a Stopped Acquisition
|
|
Live Chat
